CENTA FLEX A models 

 By a flexible rubber drive. Excels at absorbing vibrations and shocks, to reduce the noise of mechanical devices. Elastomer rubber in part by the polygonal rubber and fill 
 The vertex of the aluminum composition, each sturdy vulcanized bonded together. This rubber body with a cylindrical hub and flange hub with bolts along the radial and axial connection 
 The drive through the rubber body. In particular, radial bolt connection, is the pre-deformation of the rubber body, cylindrical hub connections, so the pre-compression structure 
 Excellent flexibility, can be excellent to absorb vibration and shock transmission. Type of the rubber body of useful bolt installed in the axial direction O0 (O zero) and not fixed 
 S0 (S zero) by inserting the S-bolts mounting to drive two, you can choose according to the loading and unloading requirements. 

 Transmission torque 10N.m ~ 4000N.m 
 Rated torque to reverse the amount of 3 ° to 6 ° 
 Operational temperature-30oC ~ to +85 oC 


 CENTA FLEX H models 

 Transmission by the rubber-elastic polyester resin (Hytrel). Excellent vibration and shock absorbent, natural rubber does not have the heat resistance, cold resistance and oil resistance. 
 In addition, only the axial movement can facilitate the connection and separation of the input and output, easy to maintain. To install the shaft can be used alone design of the clamping mechanism 
 (The CENTA-LOC) with the spline shaft connection, the use of CentaLock institutions connect with clamping hub, bushing and spline shaft is completely fixed, no friction and wear. 
 (The CENTA-LOC Clamping hub products after receiving orders, is designed.) 
 Transmission torque 100N.m ~ 2500N.m 
 To reverse the amount of rated torque 0.2 ° to 0.3 ° 
 Operational temperature-40oC ~ +120 oC 



 CENTA FLEX X-Type 

 Cushioning material using high-quality special plastic (Zytel). Has hard to reverse the direction of bending and axial excellent flexibility, {backlash} zero. Models from the component 
 (Cushioning material) and the cylindrical hub, flange hub fixing bolts composition of O2 (O 2)-type and floating shaft to connect the two components of the floating shaft OG 
 (OG), remove the OG-axial bolts without moving can exit. 

 Transmission torque 15N.m ~ 370N.m 
 Rated torque to reverse the amount of 0.12 ° 
 Operational temperature-30oC ~ +90 oC 


 CENTA FLEX B models 

 Buffer materials using a flexible plastic (polyurethane or polyester) components, transmission is excellent in absorbing vibrations and shocks can reduce the noise. With polyester resin 
 Excellent heat resistance and cold resistance of the CF-BH type, with twice the torsional stiffness of the polyurethane resin. The structure of the small structure inserted between the two bushing components and simple design, 
 Convenient loading and unloading device as a whole is easy to maintain. 

 Transmission torque 30N.m ~ 1400N.m 
 Reverse the rated torque of 2.5 ° / CF-B, 4 ° / CF-BH 
 Operational temperature-40oC ~ +80 oC / CF-B,-40oC ~ +80 oC / CF-BH 


 CENTA the MAX 

 Drive, vibration and shock absorbent excellent engine connector is a flexible rubber, very soft to reverse direction, can be caused by torsional vibration resonance point is reduced to below the engine at low altitude turn. Axial is very short, without leaving the space, can be installed directly on the SAE standard J620 Engine flywheel. Merely by moving axially, can easily connecting and disconnecting the input and output, easy to maintain. 

 Transmission torque 120N.m ~ 14000N.m 
 Rated torque to reverse the amount of 12 ° 
 Operational temperature-30oC ~ +80 oC 

 Applications: 

 Typical applications such as diesel engine driven generators, 
 Compressors, pumps, electric motors, 
 Marine propulsion engine dynamometer. 
 A. Diesel engines (engine) + coupling + hydraulic pump 
 A fully hydraulic excavators (Model: CF-A, H) 6 tons mini excavator; more than seven tons of hydraulic excavators 
 2 Wheel Excavator (Model: CF-A, H) 
 3 crawler crane (Model: CF-A, H, CM) 
 4, tire cranes (cranes) (Model: CF-A, H, CM) 
 5, shoveling machine (hydraulic drive of the HST: engines + hydraulic pump →) (Model: CF-A, H) 
 6, crawler loaders (Model: CF-A, H) 
 7, motor grader (Model: CF-H) 
 8, the crawler rig (Model: CF-A) 
 9, cement high-pressure pump (Model: CF-A, H) 
 10 dump trucks (Model: CF-A, H) 
 11, walking Crusher (crushing machine) (Model CF-A) 
 12, the vibrating roller (Model: CF-A, H) 
 13, the engine compressor (Model: CF-A, CM) 
 14, the engine generator (Model: CF-A, CM) (European type: Bearing style) 
 Two. Motor + coupling + load (hydraulic pumps, reducer, etc.) 
 An injection molding machine (Model: CF-B, CF-A) 
 2, generally with the pump (Model: CF-CF-B, AL / CL) 
 3, wind power (Model: CF-A-OZ) 
 4 textile machinery (SERVOMOTOR style CF-A-001/002-O2) 

 Kunshan Kai statue standing inventory, short delivery time, welcome customers to inquire!